Description

Square tilt bollard (post) in galvanised steel with a  flat top. This folding bollard has a locking system for a triangular key (triangle lock), Euro cylinder lock with three keys or for a padlock (not included).

The tilt bollard is made of hot-dip galvanised steel.

This bollard can also be delivered powder-coated in white and with a red reflector.

Other colours are also available (please make an inquiry about this).

The bollard can either be supplied with a flange for bolting on to a surface or supplied with a cast-in part, 400 mm, for casting.

When the bollard is placed on the ground, the height is approx. 11 cm above the ground, so that cars can pass without a problem.

The bollard is held in place by a hinge.

Specification - tilt bollard (collapsible parking guard):

• Tilt bollard with foot flange for bolting onto tiles or asphalt
• Tilt bollard with lower part (400 mm) for casting (burying)
• 70 x 70 x 500 mm (above ground)
• 70 x 70 x 900 mm (above ground)
• Height (collapsed) approx. 11 cm
• Hot-dip galvanised steel - or galvanised and painted (with reflectors)
• The tilt bollard is offered with a padlock, triangular lock (locking system) or cylinder lock with key

The bollard can also be delivered in a round (cylindrical) version and with an eye for a chain (barrier).

This tilt bollard, which is characterised by being very solid and practical, is popular for blocking and road marking in public buildings, institutions, commercial buildings and residential areas.

Often the bollard is also used in parking areas at sports arenas, factories (businesses), shopping centres, housing associations and hospitals.

Did you find what you were looking for? 

Otherwise, see our other selection of bollards produced in our own factory where we also have a large warehouse. 

You can find more bollards (posts) here