Description

Tilt bollard (post) in galvanised steel with rounded top. This tilt bollard has a locking system for a triangular key (triangle lock) or locking mechanism with a Euro cylinder lock with three keys.

This is a solid tilt bollard made of heavy-duty hot-dip galvanised steel and can optionally be delivered powder-coated white with a red reflector.

It is also possible to deliver the bollard in other colours.

The bollard can either be supplied with a flange for bolt mounting (bolting on) to a substrate or supplied with a cast-in part, 400 mm. The bollard can be put down, but is still fixed with a tilting hinge at the ground.

When the bollard is placed on the ground, the height is approx. 10 cm above the ground so that all vehicles can pass.

The bollard is hinged so that everything stays in the same place.

Specification - tilt bollard (collapsible parking guard) for driveway:

• Tilt bollard with foot flange for bolt mounting on tile or asphalt
• Tilt bollard with lower part (400 mm) for casting
• ø60 x 900 mm (above ground)
• ø76 x 900 mm (above ground)
• Height (lying) approx. 10 cm
• Hot-dip galvanised steel - or galvanised and painted (with reflector)
• The tilt bollard is offered with a triangular lock (locking system) or cylinder lock with key. The bollard can also be delivered in a square tube - the other bollards can be seen here

This tilt bollard, which is characterised by being solid and practical, is popular for blocking and road marking at public buildings, housing associations, schools, institutions, commercial buildings and residential areas.

Often the bollard is also used in parking areas at sports arenas, factories (businesses), shopping centres, owners' associations and hospitals.